S12498Si photodiode

S12498

Datasheet [191 KB/PDF]

A scintillator can be mounted directly on the chip.

 

The S12498 is a Si photodiode suitable for non-destructive inspection of baggage and the like and general industrial measurement. As it is a back-illuminated photodiode, photosensitive area does not have wires, and therefore a scintillator can be mounted directly on the photodiode.

 

Features
- Spectral response range : 400 to 1100 nm
- Photosensitive area: 6.0 × 6.0 mm - Easy scintillator mounting

Notice

The chip of this product is not sealed and is exposed. Parts such as electrodes on the chip are not protected by an enclosure or window and so require especially strict care during handling compared to ordinary products.
Before using this product, always read “Unsealed products / Precautions” described below.

Unsealed products / Precautions [PDF]

Go to top

Specifications

Photosensitive area 6.0 × 6.0 mm
Number of elements 1
Package PWB with pins
Cooling Non-cooled
Reverse voltage (max.) 10 V
Spectral response range 400 to 1100 nm
Peak sensitivity wavelength (typ.) 920 nm
Photosensitivity (typ.) 0.57 A/W
Dark current (max.) 150 pA
Rise time (typ.) 15 μs
Terminal capacitance (typ.) 380 pF
Measurement condition Typ. Ta=25 ℃, unless otherwise noted,
Photosensitivity: λ=920 nm, Dark current: VR=10 mV, Terminal capacitance: VR=0 V, f=10 kHz

Go to top

Spectral response

k_s12497_sr_xx.jpg

Go to top

Dimensional outline (unit: mm)

k_s12498_do_xx.jpg

Go to top

Recommended products

Go to top

Disclaimer
 [66KB/PDF]

The save-to-list function can only work if JavaScript is turned on.

The recently viewed function can only work if JavaScript is turned on.