Laser-Driven Light Source (LDLS)

EQ-99X-FC-S

The EQ-99X-FC-S is a fiber-coupled LDLS. Two types of optical fibers are available for selecting a wavelength range that matches your application. The lamphead of the EQ-99X-FC-S is compact and generates lower heat, making it ideal for experiments in cramped spaces or for installation into equipment. The lamphead is designed to cool by natural convection thus eliminating vibrations caused by cooling fans and ensuring a highly stable light output.

Features

  • Extremely broad wavelength range:190 nm to 2500 nm
  • Fiber can be selected from 2 types(UV type:190 nm to 900 mn、Broadband type:350 nm to 2500 nm)
  • Long lifetime:10 000 hours
  • High radiance from a small plasma

Spectral power

LDLS

Specifications

Parameter Description / Value Unit
Optical interface Fiber coupled output
Wavelength range 190 to 2500 nm
Plasma size (FWHM) Typ. 100 × 180 μm
Numerical aperture NA 0.22
Lifetime Typ. 10 000 h
Warm-up time 30 min
Laser class Class 1
Broadband optical power 95 mW
Output termination FC or SMA 905
Cooling method No auxiliary cooling required
Nitrogen purge Recommended. Grade 4.8 or higher, filtered to 5 μm. 20 psiG ±2 psiG
Applicable standards EN 61010-1
EN 61326-1
IEC 60825-1
IEC 62471
EN 50581
Device configuration Lamphead, Power supply controller, Remote control, AC adapter, Necessary cables
Power rating Input voltage (AC) 100 to 240 V
Power frequency 50 / 60 Hz
Power consumption 175 W

① The optical fiber should be selected according to wavelength range required for the application.
② Optical power from the optical fiber (UVFIBERX-230) was measured with a thermopile.

Fiber

Optical fibers can be selected with the following core diameters, lengths and connector terminations.

Parameter UV type Broadband type Unit
Type UV FIBERX BB FIBERX
Recommended wavelength range 190 to 900 350 to 2500 nm
Broadband optical power 30 95 195 25 80 180 215 mW
Core size 115 230 455 100 200 400 600 μm
Length 1 2 1 2 1 2 1 2 1 2 1 2 1 2 m
Termination FC-FC or FC-SMA

※ The model number of each optical fiber is determined by fiber type, core diameter, length and connector termination.
Example: UVFIBERX-230-1M-FC-SMA (UV type fiber, core diameter: 230 μm, length: 1 m, connector: FC-SMA)
※The EQ-99XFC must use the above dedicated optical fibers.
 Attempting to use any other optical fibers will cause optical fiber connector problems, damage to the lamphead and will affect performance.
③ Although light at wavelengths shorter than 350 nm also passes through the broadband type optical fiber, the fiber transmittance within that wavelength range will drop within a short time. For applications that require UV output, we strongly recommend selecting the UV type optical fiber as they are optimized for that wavelength range.

Dimensional outlines (Unit mm)

Lamphead

LDLS


Controller

LDLS

Contact us for more information.

  • Literature
  • Price
  • Delivery
  • Custom order
  • Support
  • Other

Contact us