C13654-01DAP-type socket assembly

Datasheet [116 KB/PDF]

The C13654-01 is a high voltage power socket assembly for 28 mm (1-1/8 inch) diameter side-on photomultiplier tubes (PMT), incorporating a regulated high voltage power supply, an active voltage divider, and a transimpedance amplifier. It enables simple yet stable PMT operations with extended DC output linearity by only supplying +15 V and connecting to a potentiometer or a 0 to +5 V for high voltage adjustment.

Specifications

Type High Voltage Power Supply Socket Assembly with Transimpedance Amplifier (DAP type)
Applicable PMT 28 mm dia. Side-on type
Input Voltage +15±1 V
Max. Input Voltage +18 V
Max. Input Current 55 (without PMT) mA
[PMT] Linear DC Output Current Min. 43 (Input voltage=+15V, control voltage=+4V) Within:±2% linearity μA
[HV Power Supply] Output Voltage Range 0 to -1250 V
[HV Power Supply] Line Regulation Against ±1 V Input Charge Typ. ±0.01 %
[HV Power Supply] Output Voltage Control Control voltage (0V to +5V) or potentiometer (50kΩ)
[HV Power Supply] Controll Voltage Input Impedance 100 kΩ
[HV Power Supply] Output Voltage Programming Response Typ. 80 ms
[HV Power Supply] Temperature Coefficient Typ. ±0.01 %/℃
[Amp] Frequency Bandwidth (-3 db) DC to 10 kHz
[Amp] Current to Voltage Conversion Factor 0.3 (Load resistance=10 kΩ) V/uA
[Amp] Max. Output Signal Voltage +13 (Load resistance=10 kΩ) V
[Amp] Output Signal Offset Voltage Typ. ±0.3 mV
[Amp] Output Signal Ripple/Noise 1 mVp-p (Max.)
Operating Ambient Temperature 0 to +50 ℃
Storage Temperature -15 to +60 ℃
Weight Typ. 47 g

Go to top

Go to top

Disclaimer
 [66KB/PDF]

The save-to-list function can only work if JavaScript is turned on.

The recently viewed function can only work if JavaScript is turned on.