S13683-02WTI2C interface-compatible color sensor


Datasheet [835 KB/PDF]

I2Ccompatible color sensor


The S13683-02WT is a color sensor that supports the inter-integrated circuit (I2C) interface. It is sensitive to red (λp=615 nm), green (λp=530 nm), blue (λp=460 nm), and infrared (λp=855 nm) light, and outputs detected results as 16-bit digital data for each color. The sensor automatically switches the photodiode of each color in order to perform measurements. The sensitivity and integration time are adjustable so that light measurements can be performed over a wide range.


-I2C interface-compatible
-Sequential measurements of red, green, blue, and infrared light
-2-step sensitivity switching (sensitivity ratio 1 : 10)
-Adjustable sensitivity (1 to 65535 times) by setting the integration time
-Low voltage (2.5 V or 3.3 V) operation
-Low current consumption: 75 μA typ.
-With infrared cutoff filter
-Wide dynamic range (low gain: 1 to 10 klx)


Package Plastic
Package type WL-CSP
Package size 1.75 x 0.23 x 0.45 mm
Photosensitive area 1.22 x 0.56 mm
Spectral response range (Blue) 400 to 540 nm
Spectral response range (Green) 455 to 630 nm
Spectral response range (Red) 575 to 660 nm
Spectral response range (IR) 785 to 885 nm
Peak sensitivity wavelength (Blue) 460 nm
Peak sensitivity wavelength (Green) 530 nm
Peak sensitivity wavelength (Red) 615 nm
Peak sensitivity wavelength (IR) 855 nm
Photosensitivity Low range (Blue) 3.35 counts/lx
Photosensitivity Low range (Green) 7.61 counts/lx
Photosensitivity Low range (Red) 9.48 counts/lx
Photosensitivity Low range (IR) 1.66 counts/lx
Photosensitivity High range (Blue) 31.7 counts/lx
Photosensitivity High range (Green) 76.2 counts/lx
Photosensitivity High range (Red) 94.5 counts/lx
Photosensitivity High range (IR) 15.3 counts/lx
Operating temperature -40 to +85 deg.C
Storage temperature -40 to +100 deg.C
Measurement condition Typ. Ta=25 deg.C, Vdd=Vbus=3.3 V, A light source, unless otherwise noted

Go to top

Spectral response


Go to top

Dimensional outline (unit: mm)


Go to top

Go to top


The save-to-list function can only work if JavaScript is turned on.

The recently viewed function can only work if JavaScript is turned on.