G13441-01InGaAs area image sensor


Datasheet [263 KB/PDF]

Image sensor with 192 × 96 pixels developed for two-dimensional infrared imaging


The G13441-01 has a hybrid structure consisting of a CMOS readout circuit (ROIC: readout integrated circuit) and back-illumi-nated InGaAs photodiodes. Each pixel is made up of an InGaAs photodiode and a ROIC electrically connected by indium bump. The timing generator in the ROIC provides an analog video output and AD-TRIG output which are obtained by just supplying digital inputs.The G13441-01 has 192 × 96 pixels arrayed at a 50 μm pitch. Light incident on the InGaAs photodiodes is converted into elec-trical signals which are then input to the ROIC through indium bumps. Electrical signals in the ROIC are converted into voltage signals and then sequentially output from the video line by the shift register. The G13441-01 is hermetically sealed in a metal package together with a two-stage thermoelectric cooler to deliver stable operation.


- Spectral response range: 1.3 to 2.15 μm
- High sensitivity: 1600 nV/e-
- Frame rate: 867 fps max.
- Global shutter mode
- Simple operation (built-in timing generator)
- Two-stage TE-cooled



Go to top


Image size 9.6 × 4.8 mm
Pixel size 50 × 50 μm
Pixel pitch 50 μm
Number of total pixels 18432 pixels
Package Metal
Cooling Two-stage TE-cooled
Frame rate (max.) 867 frames/s
Spectral response range 1300 to 2150 nm
Dark current 30 pA
Measurement condition Ta=25 ℃, Td=-20℃, Vdd=5 V, Vb1=0 V, PD_bias=4.2 V

Go to top

Spectral response


Go to top

Dimensional outline (unit: mm)


Go to top

Recommended products

Go to top


The save-to-list function can only work if JavaScript is turned on.

The recently viewed function can only work if JavaScript is turned on.