Various Amplifier Units/Modules are prepared for Photomultiplier tubes (PMT) and/or current output version of PMT modules. The current output signal from a PMT can be directly input to these devices.
The C5594 series is suitable for high-speed PMT such as MCP-PMT(microchannel plate photomultiplier tube). The C6438 can be recommendable to cover the shortage of PMT gain for Single Photon Counting Application.
The M7279 series and M8879 series are prepared for SUBSTRATE-PACKAGING.



Lineup

Please click the Type No.

12 items found

Amplifier unit: C5594

Amplifier unit that cutoff frequency of 1.5 GHz for reliable amplification of high-speed output pulse from PMT. Choice of SMA or BNC input and output connectors.

Amplifier unit: C6438

Amplifier unit of bandwidth from DC to 50 MHz, and current-to-voltage conversion factor of 0.5 mV/uA. It is ideal for applications requiring high gain for photon counting, or to reinforce PMT gain.

Amplifier unit: C6438-01

Amplifier unit of bandwidth from DC to 50 MHz, and current-to-voltage conversion factor of 25 mV/uA.

Amplifier unit: C6438-02

Amplifier unit of bandwidth from DC to 50 MHz and current-to-voltage conversion factor of 5 mV/uA, non-inverting / Inverting output switchable.

Amplifier unit: C7319

Amplifier unit of switchable frequency bandwidth (2 ranges) and current-to-voltage conversion factor (3 ranges). It is ideal for applications requires low noise and high gain.

Amplifier unit: C9663

Amplifier unit of wide bandwidth from DC to 150 MHz, and current-to-voltage conversion factor of 4 mV/uA.

Amplifier unit: C9999

Amplifier unit of bandwidth from DC to 10 MHz, and current-to-voltage conversion factor of 50 mV/uA.

Amplifier unit: C9999-01

Wide bandwidth : DC to 10 MHz, Current-to-voltage conversion factor : 10 mV/uA at 50ohm load resistance, Non-inverting / Inverting output switchable.

Amplifier unit: C11184

Amplifier unit of wide bandwidth from DC to 300 MHz, and current-to-voltage conversion factor of 1.25 mV/uA. The input and output connector is MCX-R. *2 pieces of connector adaptors will be attached to be used as BNC connector.

Amplifier unit: C12419

Amplifier unit of bandwidth from DC to 1 MHz, and current-to-voltage conversion factor of 1 V/uA.

Amplifier module: M7279

The compacted on-board type amplifier module of bandwidth from DC to 10 MHz, and current-to-voltage conversion factor of 10 mV/uA.

Amplifier module: M8879

The compacted on-board type amplifier module of wide bandwidth from DC to 150 MHz, and current-to-voltage conversion factor of 4 mV/uA.

Go to top

Disclaimer
 [66KB/PDF]

The save-to-list function can only work if JavaScript is turned on.

The recently viewed function can only work if JavaScript is turned on.