C10000-A01TDI board level camera

c10000-A01 product photo

Catalog [739 KB/PDF]

The C10000-A01 is a TDI camera. TDI technology is useful for a wide range of imaging applications which requires high speed and high sensitivity simultaneously which a typical line scan camera can not make an useful image. TDI is a special image acquisition method that has been used extensively in machine vision applications for industrial inspection. TDI imaging is appropriate for applications where it is desired to record a linear process over time, or where the aspect ratio of the object being imaged is significantly asymmetric. The camera is particularly useful for low light level scanning applications. Frame readout mode is available for easy focusing.

Features

  • Single PC board module type camera
  • High resolution / high sensitivity (Horizontal spatial resolution with 128(V) TDI stages) • 2048(H) × 128 (V) , 4 TAP
  • Line rate up to 50 kHz
  • High speed imaging with high-sensitivity and low noise
  • Great spectral response for UV to NIR with back thinned CCD
  • Dynamic range of 1600:1
  • 12 bit / 8 bit selectable A/D converter
  • Bidirectional scanning operation
  • Frame readout mode for easy focusing

Go to top

Principle

c10000-A01 principle

Go to top

Applications

  • Fluorescent imaging
  • In-line inspection with low light illumination
  • Scanning for a large size sample (e.g. LED flat panel)

Go to top

Specifications

Type number C10000-A01
Imaging device Back thinned type
Effective number of pixels 2048 (H)×128 (V)
Cell size 12 μm (H)×12 μm (V)
Effective area 24.58 mm (H)×1.536 mm (V)
Readout mode TDI mode / Frame readout mode
TDI transfer direction Bidirectional transfer
TDI output channel 4 TAP (512×128)
Anti-blooming Lateral overflow drain (100×)
TDI pixel clock rate 30 MHz
TDI line rate 0.45 kHz to 50 kHz
TDI line rate control Internal setting by serial command / External trigger
Full well capacity 80 000 electrons (typ.)
Readout noise 50 electrons rms (typ.)
Dynamic range 1600:1
Binning 2 x 2
Analog gain 1 time to 5 times (16 steps)
A/D converter 12 bit/8 bit
Interface Camera Link Base configuration
Camera control Serial control in Camera Link
Camera output clock 60 MHz
Camera output channel 2 TAP (1024 x 2)
Connector Mini Camera Link (SDR) x 1
Lens mount F-mount
Power requirements DC+12 V
Power consumption Approx.13.2 VA
Ambient operating temperature 0 ℃ to +40 ℃
Ambient storage temperature -10 ℃ to +50 ℃
Ambient operating humidity 0% to 80 % (with no condensation)
① Frame readout mode is useful for easy focusing, but it is not suitable for measurement. Please consult with our sales office for details.
② Internal TDI line rate is set by 100 ns step.
③ Selectable by serial command.
④ AC adapter and external trigger cable are not included.

Go to top

Spectral response

c10000-A01 spectral response 

Go to top

Dimensions

c10000-A01 dimensional outline

Go to top

Go to top

Disclaimer
 [66KB/PDF]

The save-to-list function can only work if JavaScript is turned on.

The recently viewed function can only work if JavaScript is turned on.