When shipped from the factory, the output voltage amplitude is set as follows。
|Type no.||Output voltage amplitude|
|C12703||Approx. +10 V|
|C12703-01||Approx. -10 V|
|C12702 series||Approx. -0.4 to -0.3 V|
|C10508-01||Approx. +3 V|
|C5658||Approx. +0.7 to +0.8 V|
The maximum incident light level is calculated for each type by the output voltage amplitude [V] ÷ photoelectric conversion sensitivity [V/W]. Incidentally, the incident light level leading to device destruction is approximately several milliwatts, so take precautions before actually inputting light to the device.
Check the following points:
*Is the power supply wiring correct?
*The termination resistor should have the values shown here.
|Type no.||Termination resistor|
|C12703 series||10 kΩ or more|
|C10508-01||10 kΩ or more|
|C12702 series||50 Ω|
When ambient fluctuating light enters an APD, it may cause noise to appear in the output. Noise from commercial power sources may become superimposed on the output signal, especially when under fluorescent lamp lighting. We recommend using the APD module in a dark location as much as possible. Also use a series power supply with low ripple noise rather than a switching power supply. If this problem is not solved, then contact our sales office for advise on the ambient condition.
For optical fiber connection to the C12702/C12703 series and C10508-01, the FC and SMA type optical fiber adapters (sold separately) are provided. Recommended optical fibers are GI type multimode optical fibers with a quartz core of 50 μm diameter and a clad of 125 μm diameter. No optical fiber can be connected to the C5658. Custom modifications are required for connecting an optical fiber to the C5658.
We will let you know the commercially available, stabilized power supplies that are suited for the APD module to be used.
Contact our sales office for details.
Use light sources such as an LD or LED that match the spectral response of the APD module. To check the light level that will be input to the APD, we recommend measuring the optical power in advance with a power monitor.
Connecting an A/D converter directly to the APD module is not recommended. The A/D converter's input impedance may adversely affect the APD module, making it impossible to obtain satisfactory characteristics.
We can make a custom modification to the APD mounted in the module and the electrical characteristics such as bandwidth and sensitivity (a service fee is required).
On the C12702 series and C12703 series, the APD gain can be changed by using the APD gain adjustment trimmer. Note, however, that this trimmer does not have any scale and stopper mechanism, and can be turned many times. So, before turning the trimmer, it is recommended to allow the reference light to enter the APD and check the output so that the trimmer can be returned to the initial state when needed. The adjustable gain range of this trimmer is from one to over several hundred times where a breakdown occurs.
It looks like you’re in the . If this is not your location, please select the correct region and country below.
You're headed to Hamamatsu Photonics website for U.K. (English). If you want to view an other country's site, the optimized information will be provided by selecting options below.
For modern websites to work according to visitor’s expectations, they need to collect certain basic information about visitors. To do this, a site will create small text files which are placed on visitor’s devices (computer or mobile) - these files are known as cookies when you access a website. Cookies are used in order to make websites function and work efficiently. Cookies are uniquely assigned to each visitor and can only be read by a web server in the domain that issued the cookie to the visitor. Cookies cannot be used to run programs or deliver viruses to a visitor’s device.
Cookies do various jobs which make the visitor’s experience of the internet much smoother and more interactive. For instance, cookies are used to remember the visitor’s preferences on sites they visit often, to remember language preference and to help navigate between pages more efficiently. Much, though not all, of the data collected is anonymous, though some of it is designed to detect browsing patterns and approximate geographical location to improve the visitor experience.
Certain type of cookies may require the data subject’s consent before storing them on the computer.
This website uses two types of cookies:
There are two ways to manage cookie preferences.
If you wish to restrict or block web browser cookies which are set on your device then you can do this through your browser settings; the Help function within your browser should tell you how. Alternatively, you may wish to visit www.aboutcookies.org, which contains comprehensive information on how to do this on a wide variety of desktop browsers.
Occasionally, we may use internet tags (also known as action tags, single-pixel GIFs, clear GIFs, invisible GIFs and 1-by-1 GIFs) at this site and may deploy these tags/cookies through a third-party advertising partner or a web analytical service partner which may be located and store the respective information (including your IP-address) in a foreign country. These tags/cookies are placed on both online advertisements that bring users to this site and on different pages of this site. We use this technology to measure the visitors' responses to our sites and the effectiveness of our advertising campaigns (including how many times a page is opened and which information is consulted) as well as to evaluate your use of this website. The third-party partner or the web analytical service partner may be able to collect data about visitors to our and other sites because of these internet tags/cookies, may compose reports regarding the website’s activity for us and may provide further services which are related to the use of the website and the internet. They may provide such information to other parties if there is a legal requirement that they do so, or if they hire the other parties to process information on their behalf.
If you would like more information about web tags and cookies associated with on-line advertising or to opt-out of third-party collection of this information, please visit the Network Advertising Initiative website http://www.networkadvertising.org.
We use third-party cookies (such as Google Analytics) to track visitors on our website, to get reports about how visitors use the website and to inform, optimize and serve ads based on someone's past visits to our website.
You may opt-out of Google Analytics cookies by the websites provided by Google:
We inform you that in such case you will not be able to wholly use all functions of our website.