X-ray TDI camera


X-ray TDI camera is useful for in-line applications requiring high-speed operation, high sensitivity and high resolution with wide area.
The C12300-121 has achieved an ultra-high speed scan of 50 kHz by shortening the detection width to 73 mm. This is ideal for capturing images of relatively small objects that are conveyed at high speed.


  • High speed readout: 50 kHz
  • High sensitivity: TDI 150 step integration
  • Bidirectional scanning operation
  • Improving radiation hardness
  • High S/N ratio with 12 bit output
  • Camera Link interface
  • Single power supply (+15 V) operation
  • Real time dark current/shading correction function
  • Equipped with frame readout mode

Continuous imaging of moving objects

Operating principle of X-ray line scan camera

X-ray TDI cameras can continuously inspect moving objects inline as they are brought into scanning range and without stopping objects such as metal sheets and separators that are fed in from roll to roll. Continuous inspection in this way means that these cameras can be applied in high-speed lines.

Imaging of object locations without directing X-rays at an angle

Operating principle of X-ray line scan camera

With X-ray inspection using 2D sensors, distortion sometimes occurs in images outside of the irradiation center of the X-ray source as a result of incident X-rays being directed at an angle to objects. This necessitates positional adjustment at each individual image capture point to ensure accurate inspection. Whereas, with X-ray TDI cameras, X-rays are irradiated at right angles to the carrying direction, and imaging is performed by integrating continuously captured images. As a result, distortion-free images can be acquired.

Bidirectional scanning supported

Operating principle of X-ray line scan camera

The C12300-121 is capable of bidirectional scanning (switching of scan direction to match the carrying direction). As a result, this series supports connection to differently oriented lines that use the same inspection systems and systems where scanning is performed in reverse when a defect is judged. It also helps improve cycle time in the inspection of large objects such as PCBs for servers.


Type number C12300-121
Scintillator CsI Scintillator
Effective X-ray tube voltage range Approx. 25 kV to 130 kV*1
Number of pixels 1536 (H) × 150 (V)
X-ray sensitive area 73.728 mm (H) × 7.2 mm (V)
Line speed 0.864 m/min to 144.0 m/min
TDI line rate 1×1: Max. 50.0 kHz (144.0 m/min)
binning 2×2: Max. 40.0 kHz (230.4 m/min)
A/D converter 12 bit
Digital interface Camera Link
External control interface Camera Link Base Configuration
Output signals (Image data) 12 bit digital output
Ambient operating temperature 0 ℃ to +40 ℃
Ambient storage temperature -10 ℃ to +50 ℃
Ambient operating/storage humidity 30 % to 80 % (With no condensation)
Power supply DC +15 V
Power consumption Approx. 30 VA

*1 Usable range of X-ray strength may vary depending on the tube current, the tube voltage and the distance.


c12300-121 dimensional outline

a8206-60 dimensional outline

Related information

Contact us for more information.

  • Literature
  • Price
  • Delivery
  • Custom order
  • Demo
  • Support
  • Other

Contact us