Products with a USB 2.0 interface may not acquire temporally continuous data (part of continuous data is thinned), though depending on the performance of the PC used and the repetition time, etc. Initially, data is transferred to the PC through the USB 2.0 interface without any problem, but the data transfer gradually delays depending on the performance and operating status of the PC (for example due to interrupt handling of another USB device connected or software simultaneously used). If the amount of data transfer begins to fail to keep pace with the amount of data that has been A/D converted, the next scan's data is skipped causing a state in which data is thinned. When a continuous measurement is performed at a high-speed repetition rate, this phenomenon occurs more significantly. The line rate listed in our datasheet of products with a USB 2.0 interface is the theoretical value at which data is continuously transferred from the circuit to the PC without loss.
In the case of products with a CameraLink interface, the above phenomenon does not occur and so continuous data can be obtained.
Check the following two points:
1.Select the appropriate camera file. For example, when using the C11512 series and PCIe-1427, select the c11512_1427_max.iid file for the Measurement&Automation software (made by National Instruments) or select the c11512_1427.iid file for the DCam-CL software (made by Hamamatsu). When using a multichannel detector head other than the C11512 series or a frame grabber board other than those made by National Instruments, select the camera file that supports them.
2.The "Measurement&Automation" and "DCam-CL" cannot be used at the same time. When starting the DCam-CL, make sure that the Measurement&Automation is not running. To start the DCam-CL after the Measurement&Automation has been running, turn off the power to the multichannel detector head and turn it back on, then start the DCam-CL.
We recommend using the following boards made by National Instruments:
PCIe-1427, PCIe-1429, PCIe-1430, PCIe-1433
Although other manufacturers' frame grabber boards operate multichannel detector heads, they cannot be used in combination with the DLL and application software that come with a multichannel detector head. If using a frame grabber board made by other manufacturers, operate the multichannel detector head by sending the commands listed in the instruction manual and also using the DLL supplied with the frame grabber board.
The dedicated cable is not supplied with multichannel detector heads. However, it is supplied with the C7557-01 multichannel detector head controller for connection to a detector head.
Use a power supply generating as little noise as possible. A stabilized DC power supply is recommended. Avoid using switching power supplies as much as possible.
The user can replace the sensor. However, the user must take sufficient measures against static electricity when handling the sensor and detector head. Refer to the instruction manual for how to replace the sensor. Please note that if the user damages the sensor or detector head during replacement, then the warranty is void even if still within the warranty period. So use plenty of caution if replacing the sensor.
It looks like you're in the . If this is not your location, please select the correct region and country below.
You're headed to Hamamatsu Photonics website for JP (English). If you want to view an other country's site, the optimized information will be provided by selecting options below.
For modern websites to work according to visitor’s expectations, they need to collect certain basic information about visitors. To do this, a site will create small text files which are placed on visitor’s devices (computer or mobile) - these files are known as cookies when you access a website. Cookies are used in order to make websites function and work efficiently. Cookies are uniquely assigned to each visitor and can only be read by a web server in the domain that issued the cookie to the visitor. Cookies cannot be used to run programs or deliver viruses to a visitor’s device.
Cookies do various jobs which make the visitor’s experience of the internet much smoother and more interactive. For instance, cookies are used to remember the visitor’s preferences on sites they visit often, to remember language preference and to help navigate between pages more efficiently. Much, though not all, of the data collected is anonymous, though some of it is designed to detect browsing patterns and approximate geographical location to improve the visitor experience.
Certain type of cookies may require the data subject’s consent before storing them on the computer.
This website uses two types of cookies:
There are two ways to manage cookie preferences.
If you wish to restrict or block web browser cookies which are set on your device then you can do this through your browser settings; the Help function within your browser should tell you how. Alternatively, you may wish to visit www.aboutcookies.org, which contains comprehensive information on how to do this on a wide variety of desktop browsers.
Occasionally, we may use internet tags (also known as action tags, single-pixel GIFs, clear GIFs, invisible GIFs and 1-by-1 GIFs) at this site and may deploy these tags/cookies through a third-party advertising partner or a web analytical service partner which may be located and store the respective information (including your IP-address) in a foreign country. These tags/cookies are placed on both online advertisements that bring users to this site and on different pages of this site. We use this technology to measure the visitors' responses to our sites and the effectiveness of our advertising campaigns (including how many times a page is opened and which information is consulted) as well as to evaluate your use of this website. The third-party partner or the web analytical service partner may be able to collect data about visitors to our and other sites because of these internet tags/cookies, may compose reports regarding the website’s activity for us and may provide further services which are related to the use of the website and the internet. They may provide such information to other parties if there is a legal requirement that they do so, or if they hire the other parties to process information on their behalf.
If you would like more information about web tags and cookies associated with on-line advertising or to opt-out of third-party collection of this information, please visit the Network Advertising Initiative website http://www.networkadvertising.org.
We use third-party cookies (such as Google Analytics) to track visitors on our website, to get reports about how visitors use the website and to inform, optimize and serve ads based on someone's past visits to our website.
You may opt-out of Google Analytics cookies by the websites provided by Google:
We inform you that in such case you will not be able to wholly use all functions of our website.