This photo IC was developed to detect the beam passage timing of the write laser used for laser printers and digital copiers, etc. It contains a high-speed photodiode and high-speed signal processing circuit to provide stable detection timing.
The analog amplitude (voltage change generated by passage of laser beam) at the Ro terminal is expressed as Vro＝Current gain x Photosensitivity x External gain resistance. External gain resistance is selected so that Vro is set to 2 to 3 V (resistance is selected in a range from 1 to 10 kilohms). Current gains of 4, 6, and 20 times are provided and selectable to match the laser beam power. In the case of dual-element type, use a resistor of the same resistance for connection to Ro1 and Ro2.
Single-element types can be scanned in either left or right direction, but dual-element types should be scanned in the direction from Ch 1 to Ch 2.
Detection is possible at 0.5 V and higher.
To utilize an advantage offered by dual-element types, which is timing stability versus power and temperature fluctuations, the Ro1 and Ro2 terminal voltage waveforms must form a cross (X) shape at the center of the dual-element photodiode. As a calculated figure, the analog amplitude that can be obtained as output is 1.5 to 8 V. However, setting the analog amplitude too high may cause faulty operation due to stray light inside the package (stray light occurring at about 6% of the ΔVRo). Setting the upper limit somewhat larger than 3 V (up to about 6 V) will not cause problems, but an excessively large analog amplitude may make it difficult to obtain a stable output, so up to 3 V is recommended.
An amplitude level greater than or equal to 1.5 V will not cause problems. However, a level below 1.5 V will prevent obtaining a cross waveform from the gain resistance terminals, so the output will no longer be stable during power and temperature fluctuations.
It looks like you're in the . If this is not your location, please select the correct region or country below.
You're headed to Hamamatsu Photonics website for US (English). If you want to view an other country's site, the optimized information will be provided by selecting options below.
For modern websites to work according to visitor’s expectations, they need to collect certain basic information about visitors. To do this, a site will create small text files which are placed on visitor’s devices (computer or mobile) - these files are known as cookies when you access a website. Cookies are used in order to make websites function and work efficiently. Cookies are uniquely assigned to each visitor and can only be read by a web server in the domain that issued the cookie to the visitor. Cookies cannot be used to run programs or deliver viruses to a visitor’s device.
Cookies do various jobs which make the visitor’s experience of the internet much smoother and more interactive. For instance, cookies are used to remember the visitor’s preferences on sites they visit often, to remember language preference and to help navigate between pages more efficiently. Much, though not all, of the data collected is anonymous, though some of it is designed to detect browsing patterns and approximate geographical location to improve the visitor experience.
Certain type of cookies may require the data subject’s consent before storing them on the computer.
This website uses two types of cookies:
There are two ways to manage cookie preferences.
If you wish to restrict or block web browser cookies which are set on your device then you can do this through your browser settings; the Help function within your browser should tell you how. Alternatively, you may wish to visit www.aboutcookies.org, which contains comprehensive information on how to do this on a wide variety of desktop browsers.
Occasionally, we may use internet tags (also known as action tags, single-pixel GIFs, clear GIFs, invisible GIFs and 1-by-1 GIFs) at this site and may deploy these tags/cookies through a third-party advertising partner or a web analytical service partner which may be located and store the respective information (including your IP-address) in a foreign country. These tags/cookies are placed on both online advertisements that bring users to this site and on different pages of this site. We use this technology to measure the visitors' responses to our sites and the effectiveness of our advertising campaigns (including how many times a page is opened and which information is consulted) as well as to evaluate your use of this website. The third-party partner or the web analytical service partner may be able to collect data about visitors to our and other sites because of these internet tags/cookies, may compose reports regarding the website’s activity for us and may provide further services which are related to the use of the website and the internet. They may provide such information to other parties if there is a legal requirement that they do so, or if they hire the other parties to process information on their behalf.
If you would like more information about web tags and cookies associated with on-line advertising or to opt-out of third-party collection of this information, please visit the Network Advertising Initiative website http://www.networkadvertising.org.
We use third-party cookies (such as Google Analytics) to track visitors on our website, to get reports about how visitors use the website and to inform, optimize and serve ads based on someone's past visits to our website.
You may opt-out of Google Analytics cookies by the websites provided by Google:
We inform you that in such case you will not be able to wholly use all functions of our website.