DAP-type socket assembly


The C13654-01 is a high voltage power socket assembly for 28 mm (1-1/8 inch) diameter side-on photomultiplier tubes (PMT), incorporating a regulated high voltage power supply, an active voltage divider, and a transimpedance amplifier. It enables simple yet stable PMT operations with extended DC output linearity by only supplying +15 V and connecting to a potentiometer or a 0 to +5 V for high voltage adjustment.

Type High Voltage Power Supply Socket Assembly with Transimpedance Amplifier (DAP type)
Applicable PMT 28 mm dia. Side-on type
Input Voltage +15 V +/-1 V
Max. Input Voltage 18 V
Max. Input Current 55 mA (without PMT)
[PMT] Linear DC Output Current Min. 43 μA (Input voltage +15 V, control voltage +4 V) Within +/-2 % linearity
[HV Power Supply] Output Voltage Range 0 V to -1250 V
[HV Power Supply] Line Regulation Against ±1 V Input Charge Typ. +/-0.01 %
[HV Power Supply] Output Voltage Control Control voltage (0 V to +5 V) or potentiometer (50 kΩ)
[HV Power Supply] Controll Voltage Input Impedance 100 kΩ
[HV Power Supply] Output Voltage Programming Response Typ. 80 ms
[HV Power Supply] Temperature Coefficient Typ. +/-0.01 %/℃
[Amp] Frequency Bandwidth (-3 db) DC to 10 kHz
[Amp] Current to Voltage Conversion Factor 0.3 V/uA (Load resistance 10 kΩ)
[Amp] Max. Output Signal Voltage +13 V (Load resistance 10 kΩ)
[Amp] Output Signal Offset Voltage Typ. +/-0.3 mV
[Amp] Output Signal Ripple/Noise 1 mVp-p (Max.)
Operating Ambient Temperature 0 ℃ to +50 ℃
Storage Temperature -15 ℃ to +60 ℃
Weight Typ. 47 g

Dimensional outline (Unit: mm)

Contact us for more information.

  • Literature
  • Price
  • Delivery
  • Custom order
  • Support
  • Other

Contact us