UVtron®は、波長185 nm ~ 260 nm (*1)の紫外線にのみ感度を持つセンサです。
赤外線方式や煙検知方式と比較して、高感度・高速応答での紫外線の検知が可能です。
*1: Ni電極の場合
必要感度や使用環境などに応じて、最適なUVtron®を選んでください。
特性および仕様などを参考にしてください。
炎自体の紫外線に感度があるため、たばこや線香のような無炎燃焼は検知できません。
特性上わずかにリニアリティがありますが、UVtron®は光量測定ではなく、紫外線があるかどうかを判別するON-OFFセンサとしての使用を推奨しています。
使用可能です。
ただし、UVtron®は紫外線を検知すると、放電して紫外線を発するため、隣接するUVtron®がその紫外線を検知してしまう可能性があります。そのため、UVtron®同士が光学的に干渉しないように設計を行ってください。
UVtron®を動作させるために以下のどちらかが必要です。
1. CRによる外部クエンチング回路+直流高電圧源
2. DC-DCコンバータ式高圧電源回路
弊社ではDC-DCコンバータ式高圧電源回路を使用しているUVtron®駆動回路 C10807/C10423を取り扱っていますので、ご希望の場合は弊社までお問い合わせください。
UVtron®の供給電圧測定には、10 GΩ程度の高いインピーダンスのマルチメータを使用してください。マルチメータのインピーダンスが十分でないと、UVtron®駆動回路の高いインピーダンスにより正確に電圧を測定できない可能性があります。
UVtron®用チェッカーランプ L9657-03のON-OFF動作に応じて、UVtron®が紫外線を検知しているか確認してください。その際、外部からの紫外線がUVtron®に入射しないように注意してください。
保証期間は納入後1年間となっていますが、通常5年程度は保管可能です。
リードピンに錆などの劣化がないか確認した上で動作確認を行ってください。保管環境にもよりますが、基本的にリードピンに錆などの劣化がなければ動作に問題はありません。
供給電圧が高くなると、比例して感度も高くなります。ただし、供給電圧が推奨動作範囲を超えるとバックグラウンドノイズ (BG)が増加するため、推奨供給電圧範囲内で使用してください。
VL: 紫外光下放電開始電圧
VD: 蛍光灯下電極間絶縁破壊電圧
寿命の定義は以下項目のいずれかに該当した場合としています。
1. 放電開始電圧が仕様のMax.の値を超えた時点
2. 感度が初期値の50 %に低下した時点
3. バックグラウンドノイズが仕様のMax.の値を超えた時点
リード線の曲げおよび切断ができるのはR2868・R9454・R244の3品種となります。その他の品種についてはリード線加工厳禁です。
ガラスバルブが割れたり、ガラスバルブに傷が付いたりしないようにしっかり固定した上でゆっくり曲げてください。
リード線を切断するなどの加工を施すと、内部電極が衝撃を受けてしまう場合があり、落下時と同様に電気的特性が劣化する恐れがあります。衝撃を緩和するために、内部電極に対してニッパの刃先を垂直方向にして切断したり、ニッパで一度に切断せず2・3回に分けて刃を入れてゆっくりと切断してください。
UVtron®のリード線に高い温度を加えると、ガラスバルブの割れや内部電極の劣化を引き起こす恐れがあります。誤動作の原因となりますので気を付けてください。リード線がハードピンのものは、専用のソケットを用意していますので、そちらの使用をお薦めします。直接基板などにはんだ付けする場合は、リード線の根元をヒートシンクなどではさみ、熱がUVtron®に伝わらないようにした上で、350 ℃・5 s 以内で作業してください。また、はんだ槽を使用することは避けてください。
はんだ付け後、フラックスはアルコールなどで完全に除去してください。
設置向きについては、視野特性を参考に陰極 (光電面)に紫外線が直接入射するように設置してください。
設置姿勢については制限はありません。
陽極リードおよび陰極リード、それぞれ1本づつ接続していただければ動作には問題ありません。
UVtron®と駆動回路を離して設置しなければならず、ケーブル容量が100 pFを超える場合は、UVtron®の陽極の直前 (25 mm以内)に電流制限抵抗 (RS:4.7 kΩ)を入れてください。
ケーブルの浮遊容量が大きい場合、放電電流も大きくなり、電極を痛める可能性があります。
バックグラウンドノイズ (BG)の原因としては以下が挙げられます。
1. 宇宙線などの放射線
紫外線よりも高いエネルギーを持つ放射線が陰極 (光電面)に入射すると、光電効果によって放電が起こることがあります。自然界に存在する宇宙線などの放射線の入射を完全に防ぐことは難しいため、信号処理回路で検知対象からの紫外線と区別する必要があります。
2. X線
紫外線よりも高いエネルギーと透過性を持つX線が陰極 (光電面)に入射すると、光電効果によって放電が起こることがあります。
3. 静電気
UVtron®に静電気を帯びたものが近づいたり触れたりすると、その高電界によって管内のガス分子が電離して放電が起こることがあります。
4. 高電界・高磁界・強い電磁波
供給電圧が高い状態では、陰極 (光電面)から電界放出によって光電子が飛び出し、放電が起こることがあります。
5. 太陽光よりも光放射強度が著しく高い光線 (レーザ・LEDなど)
光放射強度が著しく高い光線が陰極 (光電面)に入射すると、熱電子放出などによってバックグラウンドノイズが増加することがあります。
6. 目的外の紫外線
UVtron®の動作としては正常ですが、検知対象以外からの紫外線によって装置が誤動作をする場合があります。これも一種のバックグラウンドノイズ (BG)と考えることができます。紫外線は普段の生活のなかにも多く存在しています。特に屋外では、アーク溶接の火花や電気スパーク (電車のパンタグラフのスパーク)など、意外なところからの微弱な紫外線にも反応します。使用の際は周囲環境に十分気を付けてください。
意図しない紫外線が入射しないように注意してください。ただし、宇宙線の影響でUVtron®が反応してしまうことは避けられないため、バックグラウンドノイズ (BG)をキャンセルする信号処理回路の使用を推奨します。弊社UVtron®駆動回路 C10807/C10423はバックグラウンドノイズ (BG)キャンセル機能が搭載されています。キャンセルレベルを変更したい場合は弊社までご相談ください。
ライター程度の光量の紫外線を発しています。
IEC62471「ランプ及びランプシステムの光生物学的安全性」では無害判定となっていますが、裸眼で長時間直視することは避けてください。
UVtron®は動作温度範囲 -40 ℃ ~ +125 ℃/動作湿度範囲 80 %以下ですので、必ず守ってください。
高温下・低温下・高湿度下で使用した場合、以下のような傾向があります。
● 高温下の場合 /劣化が早くなります。
● 低温下の場合 /紫外光下放電開始電圧 (VL)が低下して感度が上がります。
● 高湿度下の場合/電圧のリークや短絡により動作が不安定になります。
もし動作湿度が80 %を超える場合は結露がないようにしてください。また、リード線を絶縁性の樹脂で埋めるなど、リード線周辺の絶縁には十分注意してください。
UVtron®は過度な衝撃が加わると陽極・陰極同士が接触してしまい、著しく寿命が短くなる場合があるためです。
ガラスバルブが汚れていると、紫外線の透過率低下やガラスの変質が起こる場合があります。機器に組み込み後はアルコールを付けたガーゼなどで定期的に清掃してください。また、UVtron®のガラスバルブ部分は素手で触れないでください。作業時は手の油などの汚れが付かないように手袋を使用してください。
CE認証はUVtron®およびUVtron®用ソケット・UVtron®チェッカーランプは対象外となっていますが、UVtron®用駆動回路・チェッカーランプ用駆動回路およびUVtron®モジュールは対応しています。
RoHS指令は全て対応しています。
REACH規制については弊社までお問い合わせください。
弊社は無償でのデモ機貸出を行っています。お気軽にお問い合わせください。
It looks like you're in the . If this is not your location, please select the correct region or country below.
You're headed to Hamamatsu Photonics website for JP (Japanese). If you want to view an other country's site, the optimized information will be provided by selecting options below.
In order to use this website comfortably, we use cookies. For cookie details please see our cookie policy.
This website or its third-party tools use cookies, which are necessary to its functioning and required to achieve the purposes illustrated in this cookie policy. By closing the cookie warning banner, scrolling the page, clicking a link or continuing to browse otherwise, you agree to the use of cookies.
Hamamatsu uses cookies in order to enhance your experience on our website and ensure that our website functions.
You can visit this page at any time to learn more about cookies, get the most up to date information on how we use cookies and manage your cookie settings. We will not use cookies for any purpose other than the ones stated, but please note that we reserve the right to update our cookies.
For modern websites to work according to visitor’s expectations, they need to collect certain basic information about visitors. To do this, a site will create small text files which are placed on visitor’s devices (computer or mobile) - these files are known as cookies when you access a website. Cookies are used in order to make websites function and work efficiently. Cookies are uniquely assigned to each visitor and can only be read by a web server in the domain that issued the cookie to the visitor. Cookies cannot be used to run programs or deliver viruses to a visitor’s device.
Cookies do various jobs which make the visitor’s experience of the internet much smoother and more interactive. For instance, cookies are used to remember the visitor’s preferences on sites they visit often, to remember language preference and to help navigate between pages more efficiently. Much, though not all, of the data collected is anonymous, though some of it is designed to detect browsing patterns and approximate geographical location to improve the visitor experience.
Certain type of cookies may require the data subject’s consent before storing them on the computer.
This website uses two types of cookies:
This website uses cookies for following purposes:
Cookies help us help you. Through the use of cookies, we learn what is important to our visitors and we develop and enhance website content and functionality to support your experience. Much of our website can be accessed if cookies are disabled, however certain website functions may not work. And, we believe your current and future visits will be enhanced if cookies are enabled.
There are two ways to manage cookie preferences.
If you don’t want to receive cookies, you can modify your browser so that it notifies you when cookies are sent to it or you can refuse cookies altogether. You can also delete cookies that have already been set.
If you wish to restrict or block web browser cookies which are set on your device then you can do this through your browser settings; the Help function within your browser should tell you how. Alternatively, you may wish to visit www.aboutcookies.org, which contains comprehensive information on how to do this on a wide variety of desktop browsers.
Occasionally, we may use internet tags (also known as action tags, single-pixel GIFs, clear GIFs, invisible GIFs and 1-by-1 GIFs) at this site and may deploy these tags/cookies through a third-party advertising partner or a web analytical service partner which may be located and store the respective information (including your IP-address) in a foreign country. These tags/cookies are placed on both online advertisements that bring users to this site and on different pages of this site. We use this technology to measure the visitors' responses to our sites and the effectiveness of our advertising campaigns (including how many times a page is opened and which information is consulted) as well as to evaluate your use of this website. The third-party partner or the web analytical service partner may be able to collect data about visitors to our and other sites because of these internet tags/cookies, may compose reports regarding the website’s activity for us and may provide further services which are related to the use of the website and the internet. They may provide such information to other parties if there is a legal requirement that they do so, or if they hire the other parties to process information on their behalf.
If you would like more information about web tags and cookies associated with on-line advertising or to opt-out of third-party collection of this information, please visit the Network Advertising Initiative website http://www.networkadvertising.org.
We use third-party cookies (such as Google Analytics) to track visitors on our website, to get reports about how visitors use the website and to inform, optimize and serve ads based on someone's past visits to our website.
You may opt-out of Google Analytics cookies by the websites provided by Google:
https://tools.google.com/dlpage/gaoptout?hl=en
As provided in this Privacy Policy (Article 5), you can learn more about opt-out cookies by the website provided by Network Advertising Initiative:
http://www.networkadvertising.org
We inform you that in such case you will not be able to wholly use all functions of our website.
Close